What is a Wire Cut to Length Machine? Know the Benefits!

A Wire cut to length machine is simply a wire cutting machine that is used for Industrial and Commercial purposes. They are not used for domestic reasons as there will be less need and more resources at home.

A wire cut to length machine is used for cutting wires and along with it, they also cut tubes that are a little soft and flexible than the hard tubes. The other uses of this machine are as follows.

1. Cutting Glass optical fibers,

2. Copper tubing,

3. Kevlar,

4. Insulated cable, etc.

Planning to buy a Wire cut to length machine? Your search ends here!

So, what is the method of cutting that is taken into use by the Wire cut to length machine?

The method is formally known as Wire Electrical Discharge Machining (Wire EDM). It uses a thin wire that works as a base, electrode, or in simple terms, a plate that holds your main wire that is to be cut, and cuts along the path that is programmed for the slicing.

Later the piece of wire that is to be cut is immersed in the dielectric fluid. This fluid does the job of increasing water resistivity and thereby enabling the wire flexibility and its moulding. Also, along with providing a base, the EDM Method takes into use the spiral of wires which move consistently and continuously and that way keeps on offering a new wire piece throughout the process of cutting.

The technique of EDM makes the process automatic, repetitive and non-stop.

Here are some of the Benefits of using the Wire EDM for cutting a wire.

1. There is high accuracy while making pieces and cuts with the help of this machine. Simply because the rolling base of wires makes the process systematic and well-programmed. Such cases register/record no delays and doubts (in most general situations).
   

2. Due to the structured and mechanical process of cutting, there is brilliant finishing on the surface and the cuts made are truly definite and detailed.
   

3. We can intertwine the wire with the help of the pilot hole and permit the entry to the internal specifications as well. This feature is the one that ticks on the complexity of the machine; which is at the end, justified considering the accuracy and the internal access.
   

4. This machinery is capable of cutting even the unfamiliar and new materials, if they are conductive. Also, the tighter materials that are typically cut on tougher Machines can also be cut on this wire cut to length machine.
   

5. This machine permits the creation and maintenance of those features that otherwise will be impossible to make with the conventional machining methods.

About Durant Tool Company:

The Durant Tool Company is one of the leading manufacturers of Wire Machinery, Rotary Turntables, and Coil handling Equipment. They are also the distributors and have flourished since more than 75 years in this Industry and the Market.

Below are some of the products that are manufactured, distributed, and sold by the Durant Tool Company.

• Count and Control Products

• Coil Handling

• Rotary Turntables for:

  1. Factory Automation

  2. Stretch Wrapping

  3. Exhibit/Display

  4. Stainless Steel figures and models

• Wire Machinery

• Material Feeding Equipment

• Stock Reels

• Counters

• Decoilers

• Uncoilers

• Unwinding Machines

• Pallet Decoilers

• Recoilers

• Rewinders

• Material Lubricators

• Roll Feeders

• Coil Straighteners

• Material Oilers

• Material Lubricators

• Electronic Servo Feeders

• Scrap Cutters

• Process Controls

• Loop Controls

• Machine bases for:

  1. Metal

  2. Wire

  3. Plastic

  4. Vinyl

  5. Rubber

  6. Rubber Hose and Foam

  7. Rotary Turntables

  8. Custom Equipment

• Cut-to-length Machines

Apart from that, the Wire Cut to Length machine from Durantco is a boon that demands minimal maintenance and delivers high performance! They offer standard feed body and electronics packages and also, create required modifications at a greatly affordable price.

Apart from that, they also deliver speed, power, and precise feed accuracy for all the applications they provide to their customers.

They put forward five various models of this product. Finished in the polish of black oxide machine tool, all the body parts of this product are manufactured precisely with the brand new CNC Machine technology. With the incorporated latest servo technology, the wire cut to length machine asks for almost no maintenance but provides high performance at every cost and position.

Luckily, the cut-to-length machines from Durant include parts that are manufactured by the company itself. The parts are mentioned below:

1. Quick Adjust Wire straightener

2. GW Series Electronic servo Roll Feeder

3. Pneumatic Cutter

All the above mentioned parts are seated on a durable machine base to make sure the overall durability of the machine stays intact.

At Durant, the products are available at quality discounts and variety. Buy the Wire Cutting Machines, now!